Main WheelBF GoodrichCMM 32-48-30

3-1599

Name: 3-1599 — Bombardier Main Wheel
Brand: BF Goodrich
SKU: 3-1599
Availability: InStock

Bombardier

Global Express 5000, XRS, 6000, 5500, 6500

Alternative Part NumberGW313-1100-7·27350-07

Book Your Service Today

(214) 337-3328AOG support available

Overview

The 3-1599 is a main wheel assembly used on Bombardier Global Express 5000, XRS, 6000, 5500, 6500. Manufactured by Goodrich.

Material

Aluminum

Manufacturer

BF Goodrich

CMM Reference

32-48-30

Aircraft

Bombardier

Maintenance Schedule

Eddy Current / NDTEvery tire change

OverhaulThe inspection intervals are calculated as follows: 1500 (landings between NDT inspections) divided by 300 (landings between tire changes) = 5 (number of tire changes between ADDED INSPECTIONS). If th

Wear Pointsbearings, o-ring grooves, corrosion

Penetrant Inspection → Overhaul

Per CMM: Per CMM, any wheel requiring penetrant inspection is processed as an overhaul. Owners may elect overhaul at any tire change to extend service life.

Parts Replaced at Tire Change

Every tire change replaces the tire, the main wheel-half preformed packing (O-ring), the valve cap, and the valve core. Specific part numbers and dash sizes vary by wheel and are pulled from the CMM at the time of service.

Always Replaced

Seals & O-Rings

MS9386-006O-ringQty 1

Hardware

TRVC5Cap, ValveQty AR

TRC4Core, ValveQty 1

Replaced If Needed

Seals & O-Rings

TRRG30O-ringQty 1

During tire change or NDT inspection, additional parts beyond the routine four may require replacement if they fail inspection or meet the rejection criteria defined in the CMM.

Parts Replaced at Overhaul

A full overhaul includes all parts replaced at tire change (listed above), plus the following components inspected and replaced per the CMM:

Seals & O-Rings

NAS1611-014O-ring (Dust Covers)Qty 2

68-1448O-ringQty 1

68-1250O-ringQty 1

Fuse Plugs

49-330Plug Assembly, Thermal Relief Plug (Part could have cadmium plating)Qty AR

49-138Plug, Thermal Relief (Part could have cadmium plating)Qty AR

Hardware

50-708Identification PlateQty 1

Other Parts on the Wheel

These components are part of the wheel assembly but are not replaced during a standard tire change or overhaul. They are only replaced when inspection per the CMM identifies a rejectable condition. APSS stocks or sources these parts on request — contact us for current availability.

Bearings

JM714249-N0629Cone, Bearing (Outer) (refer to paragraph 4. in the introduction to IPL)Qty 1

47688-20629Cone, Bearing (Inner) (refer to paragraph 4. in the introduction to IPL)Qty 1

47620-20629Cup, Bearing (Inner) (refer to paragraph 4. in the introduction to IPL)Qty 1

Seals & O-Rings

39-119Seal, Grease (Outer)Qty 1

68-1249Seal, Grease (Inner)Qty 1

Fasteners

85-592Ring, Retaining (Outer)Qty 1

85-591Ring, Retaining (Inner)Qty 1

63-495Nut, Self-Locking (Part could have cadmium plating)Qty AR

80-702Washer, Countersunk (Part could have cadmium plating)Qty AR

43-1247Bolt (Part could have cadmium plating)Qty AR

56-1054Retainer, Grease (Outer)Qty 1

56-1055Retainer, Grease (Inner)Qty 1

MS21083N3Nut (Part could have cadmium plating)Qty AR

AN960-10Washer, Flat (Part could have cadmium plating)Qty AR

NAS563-27Bolt (Repls Item 170A) (Part could have cadmium plating)Qty AR

NAS1102E4-8Screw (Part could have cadmium plating)Qty 8

Heat Shields

378-113Shield, HeatQty 1

Hardware

TR762-03Valve Assembly, Tubeless (Refer to paragraph 5. in the introduction to IPL)Qty AR

TR762-02Stem, Valve (Refer to paragraph 5. in the introduction to IPL)Qty AR

60-864SpacerQty 1

SR258LSlimsert®Qty 3

SRW258LSlimsert® (Oversize Service Part)Qty AR

97-148-1Weight, Balance (1/2 oz.) (Part could have cadmium plating)Qty AR

97-148-2Weight, Balance (1/4 oz) (Part could have cadmium plating)Qty AR

379-34GasketQty 8

2391-4CN375Twinsert® (Service Part) (Order Item 190C with this part)Qty AR

4691-4CN339Twinsert® (Service Part) (Order Item 190B with this part)Qty AR

Wheel Components

The structural components of the wheel assembly itself. These are not replaced on a standard service and come into play only when damage, corrosion, or cracks exceed the repair limits established by the CMM.

Wheel Halves

300-912Assembly, Wheel Half (Outer)Qty 1

10-1694Wheel Half, Outer (NONPROCURABLE)Qty 1

300-913Wheel Half Assembly (Inner)Qty 1

10-1695Wheel Half, Inner (NONPROCURABLE)Qty 1

Wheel Components

170-584-1InsertQty 8

3591-4CN250Insert, Heli-Coil®Qty 8

3891-4CN375Insert, Heli-Coil® (Oversize service part)Qty AR

Inspection Criteria

General

General overhaul criteria — see the CMM for full specifications and numeric limits:

Drive keys: replace if damaged, corroded, or loose.
Heat shield: replace if cracked, burned, or mechanically damaged.
Bolts and nuts: replace if cracked, corroded, thread-damaged, or failing the back-off torque test.
Bearings (cones and cups): replace if spalled, discolored from heat, pitted, or showing any surface wear.
Wheel halves: replace if cracked, out-of-round beyond CMM limits, or showing seal-groove damage.
Preformed packings and O-rings: replace at every disassembly.
Retaining rings and lockwire: replace whenever removed.