Window Care, Installation Products, Parts and Accessories

LP Aero Plastics - Acrylic Polish and Sealant Not just any polish is good enough to carry our name! A superior no-wax, non-yellowing formula containing polyethylene polymers. This superior product not only gives a super slick surface to your windshield and windows, but can also be used on your entire aircraft, including all the painted gloss surfaces, aluminum and fiberglass. Ease of application and removal is unmatched. Sold in 16 oz. single bottles and in cases of 12.

"210" Plastic Cleaner and Polish
For those who prefer a windshield and plastic cleaner in an aerosol spray.

"210 Plus" Plastic Scratch Remover
A fine liquid abrasive for removing fine scratches that ordinary cleaner/polishes can't handle.

Prism Kit
This inspection prism kit is ideal and invaluable for inspecting windows on the aircraft where the holes and edges are hidden by the aircraft skin or fairings. By applying the couplant and positioning the prism on the window next to the edge of the skin, it allows you to see the entire edge of the acrylic including the mounting holes from top to bottom. You are able to see cracks and breaks in the acrylic or glass.

Special Acrylic Drill Bits
Don't be fooled by the over the counter so-called "plastic drill bits" purchased at your local hardware store. Our drill bits are specially sharpened to scrape a clean hole in your acrylic window. These drill bits will not chip or crack the acrylic like standard drill bits. They are available in individual sizes from 1/8" to 1/2" and 1/2" 100 degree countersink. Sets with countersink and index box take the guesswork out of which bits to purchase. This type of bit is required when drilling windshields and windows is specified. Remember that acrylic expands and contracts, so drill your holes oversize.

Foam Sealing Tape
This is an adhesive backed, closed cell foam tape which is available in various sizes by the roll. This tape can be wrapped around the edges of the windows to both cushion and seal. DO NOT STRETCH DURING APPLICATION, IT WILL PULL BACK AND LEAVE GAPS. Piper used this extensively in their window installations.

Felt Sealing Tape
Adhesive backed in various widths and thicknesses. Used on numerous Cessna front and rear windshields. Available in rolls and by the foot.

Piper Black Tar Tape
Available in rolls 1/16" x 1" by 50 ft. Used by Piper on many of the older windshield installations.

Strip Sealants
The following are strip type sealants. These are especially useful in filling large gaps. These sealants are used in many Cessna installations.

Polyurethane Sealant
Bostik 1100FS Fast Set Polyurethane Sealant is now being recommended by Piper Aircraft for many of their window installations. This is a non-hardening, paintable, fast curing, sealant. (Work life - 70 minutes, Tack free - 90 minutes, Full cure - 1.5 to 3 days) Do not use where holes have been drilled through the sealing/mounting edge of the windshield.

RTV-732
Dow Corning Silicone Sealant in clear and black. 10.3 oz. tubes. Be sure to mask both the window and the aircraft skin prior to applying the sealant. This will make for very easy cleanup and a professional installation. This applies to any sealant you may use.

Two-Part Polysulfide Sealants
This is a two part, gray sealant, available in both an 8 oz. can with separate accelerant and a two part cartridge for use with a hand application gun.

This sealant meets Military Specifications - MIL-S-8802
Interchangeable sealants:

Courtaulds Aerospace - Pro-Seal 890B, PR-1440B, PR-1487
D Aircraft Products - BR4005B
Flamemaster Corp - CS3204B
Advanced Chemistry and Technology - MC-236B
Fiber Resin Corp - PS-1102B
J & R Industries - WS-8020B

Bonding Kit For Grumman/Gulfstream/American General AA-1 and AA-5 Series Windshields and Canopies
The sealant, hard-to-find primers and instruction sheet are included for bonding the windshield to windshield bow and the canopy to its frame.

Acrylic Cement
Used when bonding acrylic to acrylic, as in compass mount blocks, reinforcing strips, patches, etc. The liquid acrylic cement is water like in consistency and is most easily applied with a syringe. The thickened cement is heavy bodied and is easily applied from the tube. The liquid cement requires tight contact between both bonding surfaces, while the thickened cement will fill slight gaps. Both will have excellent bonding strength when fully cured.

Installation Kits for Beechcraft Conversions 978, 979, 980, 981, 991, 997

Vent Window Hinge and Latch Assemblies
For replacing vent window hardware on: Beechcraft models 33, 35, 36, 55, 56, 58, 95.

Bellanca Viking & Super Viking

Piper PA-28, -32, -34, -44.

Compass Mounting Kits
These compass mounting kits are designed primarily for use on Cessna windshields which are using our STC compass mounting block bonded to the windshield. The windshield part number is designated with a suffix (/CMB). Kits are available with or without a new Airpath compass.

Kit includes Airpath compass, compass housing, deviation card, attached mount, and hardware.

Kit includes compass housing, deviation card, attached mount, and hardware.(Compass not included)

Glareshield Compass Mount
This is a polished acrylic compass mounting bracket which is bent at a 90 degree angle and allows you to mount your compass to the top of your glareshield.

Aircraft Quality Sheet Acrylic
Sheet acrylic is available in the following colors, sizes, and thicknesses. These sheets meet Federal specification L-P-391D and are of aircraft quality. Each sheet is available in clear, 2111 green tint, and 2515 solar gray tint. Also available are acrylic sheets meeting MIL-P-5425D, MIL-P-8184E, and MIL-P-25690A.

Acrylic Sheet Sizes:

Standard size 48" x 72" - .060, .080, .100
48" x 96" - .125, .250
72" x 96" - .125, .150, .187, .250

NOTE: These are nominal thicknesses based on the industry's cell cast acrylic sheet tolerances. The tolerance range chart is shown below. Pricing and sheets sizes of other tints are available upon request. Minimum order may be required.

THERE IS A 20% CUTTING CHARGE ON ALL OTHER SIZES. MINIMUM CUTTING CHARGE OF $10.00. CRATING CHARGE MAY APPLY.

Note: As an additional service to our customers, certain parts which are listed in this catalog are not manufactured by LP Aero Plastics and are in stock or available. The quality system of these parts is governed by their respective manufacturers.

© 2000 LP Aero Plastics, Inc. All Rights Reserved